Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

Salsa Chainring (110mm BCD)
$33.50 - $54.00
Salsa chainrings are made from CNC-machined 7000-series aluminum for low weight and excellent stiffness. The teeth are neither ramped nor pinned so they're great for singlespeed use. They also work with double and triple ring setups, too.
BOX Cosine Chainring
$49.95
- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear
SRAM X-Sync EX1 Chainring
$21.00
The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1
Surly MWOD Inner Chainrings (Stainless)
$28.00 - $30.00
Surly's MWOD Inner Chainrings are made from stainless steel for extreme durability. These rings are compatible with Surly's MWOD cranks.
SRAM RED22 X-Glide 11-Speed Chainring -110 BCD
$41.00 - $147.00
Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 22 compact crank, these are the rings for you.
Wheels Manufacturing Inc. Individual Chainring Spacer
$16.05 - $17.84
- For chain and derailleur alignment - 20 per bag
SRAM X-Sync Steel Direct Mount Chainring
$20.00
The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring
FSA Pro Road S9 Chainring
$35.99
FSA's Pro Road chainrings are made from CNC-machined 7000-series aluminum for low weight. The teeth are ramped and pinned for excellent shifting, too.
All-City Cross Chainring
$40.00 - $48.00
These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible
All-City 612 Track Ring
$55.00
612 Track rings are the perfect compliment to any 144mm B.C.D. crankset. They are made from 7000 series aluminum and feature a lovely and durable anodized finish. - BCD: 144 - Chain Compatibility: 1/2-inch x 1/8-inch
All-City Pursuit Special
$79.99
The Pursuit Special is All-City's addition to the pantheon of high end track chainrings. They were designed in house by track racers for track racers and are optimized for weight, stiffness, and engagement. These beauties are cnc’d in the USA and utilize a proprietary tooth profile for smooth and quiet operation. The 49-52’s utilize a solid body design with reliefs in the back for weight savings, while the 46-48’s have full cutouts. In sticking with the theme of their aluminum track bike, the Thunderdome, All-City named these rings after Mad Max’s car, the Pursuit Special. - Material: 7000 Series Aluminum - Ring Position/Type: Single
Odyssey La Guardia Sprocket
$54.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum
Odyssey Tom Dugan Fang Sprocket
$49.99
This is Tom Dugan’s all new signature sprocket. In addition to its classic look, the Fang increases in thickness towards the center of the sprocket for increased strength. - 7075 Aluminum - Sweet machining
Surly Stainless-Steel Chainring (94mm BCD)
$30.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Surly Stainless-Steel Chainring (104mm BCD)
$30.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Wolf Tooth Components Shimano M985 Chainring
$79.00
- Fits 88mm BCD used on Shimano XTR M985 race crankset (not M980 Trail) - Features Drop-Stop tooth design to prevent unwanted chain drop - 52mm chainline - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 44g (30t)
TruVativ Trushift Steel Chainring
$21.57 - $25.17
- Trushift middle and outer rings (32T, 36T, and 44T) feature shift ramps and pins - Ring Position/Type: Outer - Drivetrain Speeds: 8, 9, 10, 11 - Material: Steel
TruVativ Sram Chainring Bolt Set
$14.00
- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly - Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)
Salsa Chainring (74mm BCD)
$23.50 - $28.50
Salsa chainrings are made from CNC-machined 7000-series aluminum for low weight and excellent stiffness. The teeth are neither ramped nor pinned so they're great for singlespeed use. They also work with double and triple ring setups, too.
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$69.95 - $83.00
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components 120 BCD Chainrings
$84.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! - These rings fit any 120 BCD crankset or spider - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components Cyclocross Chainring
$79.95 - $89.95
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components 102 BCD Chainrings For XTR M960
$79.95
The XTR M960, now 4 generations old in the XTR lineage, is an oldie-but-goodie crankset and Wolf Tooth aims to meet your 1x needs with these rings. Compatibility: - These rings only fit on the M960 crankset in the middle ring position. They are a 102mm BCD. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention)
Wolf Tooth Components Direct Mount Chainrings for SRAM Cranks
$69.95 - $79.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:
Wolf Tooth Components 104 BCD Chainrings
$59.95 - $64.95
The 104 BCD chainring was Wolf Tooth’s first product ever and it is the most common bolt pattern on double and triple cranksets. Wolf Tooth’s patented Drop-Stop tooth design is the best available anywhere. Compatibility: - These rings fit any 104 BCD crankset - 30 tooth rings require chainring bolts that are 7-10mm long. All other sizes require single ring specific bolts that are ~6mm long. - 30t x 104BCD ring is the only QUARQ power meter compatible 30t ring available! - For 1x9, 1x10, ,1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt for Shimano Cranks
$79.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 110 BCD Cyclocross and Road Chainrings
$79.95 - $89.95
Wolf Tooth was first to the market with Cyclocross 1x specific chainrings because they saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on road applications with the giant 50t rings! Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. Do NOT fit Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 120 BCD Chainrings
$84.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! Compatibility: - These rings fit any 120 BCD crankset or spider. - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
FSA Pro Road S10 Chainring
$49.99
FSA's Pro Road chainrings are made from CNC-machined 7000-series aluminum for low weight. The teeth are ramped and pinned for excellent shifting, too.
Wolf Tooth Components 94mm BCD For 5-Bolt Chainrings
$63.95
This 94 BCD 5 bolt ring will serve all your Vintage crankset and Surly crankset needs! - 4 of the holes are threaded and 1 is a normal through bolt hole (done for Surly compatibility). Use a stock 10mm chainring bolt for the fifth, hidden arm. - These rings fit any 94 BCD 5 bolt crankset - For Plus size bike applications with the Surly OD crankset, e.g. Instigator and Krampus, you will need to use the stock spacers (Spacer Kit QBP Part number CR8609) that came with your 1x setup. You will also need some 16mm bolts from problem solvers. - This ring will work with your vintage 94 BCD 5-bolt cranksets!! - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes.
Page 1 of 5 Next page